Banner image by Mike116
Black powder questions? Don't hesitate to ask! We have the friendliest, most knowledgeable members, ready to help you with all things black powder.
The screw head I'm referring to is the arbor spacer that he uses.
The gun is an Uberti Dragoon of 1984 manufacture so yes it does have a short arbor which is what I want to fix.My plan was to do the 45 Dragoon fix, a number 14 SS sheet metal screw head in the arbor hole.My concern is with the tight fit of the two parts, when sanding the screw head down and then dropping it in the arbor hole to check for fitment.I believe 45 dragoon says to sand the head down till the barrel and frame meet then do your final arbor sanding to get your endshake.But if I happen to sand the screw head down a little to far and then force the two assemblies together would I not already be too short. Maybe I'm overthinking this. I'll go back and reread the Shop Series thread again. Thanks everyoneShootemup
You guys are awesome!! You actually understand what I'm trying to say !!!!
Thanks 45 Dragoon it makes sense now just needed that last little bit of info to make it all click in my head.It is great to have you here willing to share your knowledge with everyone even when these are the things you do for a living.