Caps Available

[Zulch]

Caps available Taylor’s & Company.
https://www.taylorsfirearms.com/rws-revolver-percussion-caps-tin-of-250.html?utm_source=Taylor%27s+Firearms+General+Newsletter&utm_campaign=5c82ce5fc4-EMAIL_CAMPAIGN_2023_08_02_01_57_COPY_02&utm_medium=email&utm_term=0_-c26e45c74c-%5BLIST_EMAIL_ID%5D&mc_cid=5c82ce5fc4&mc_eid=0f9ef3e2d8

[Hawg]

They're expensive.

[ShotgunDave]

Wow. $38 per tin. Crazy.

[Zulch]

Fine Print:
This is a tin of 250 quantity revolver caps made by RWS. These caps will work with #10 or #11 nipples. Caps are required to ship Hazmat and must ship separate from firearms.
Still Pricey though

[Marshal Will]

Everything is pricey these days. It's good to see them available.

[Hawg]

I haven't checked lately but at the height of the pandemic my LGS had CCI #11 for 8.00 per 100. They're probably cheaper now.

[Clydesdale4x4]

Wow. $38 per tin. Crazy.

Mathed it, it's not HORRIBLE... works out to about $.15 or $.18 per cap. and the fact that they are Bi-Nipple is a win.
(got the email, cupped the debit card, and then thought better, my LGS where I lived and am moving back to seems to have a decent supply of CCI at an equivalent pricepoint)

[Navy Six]

I've only found RWS 1075 caps once many years ago, before the Slix Shot nipples became available. They worked fine on factory nipples then. I would like to have "practice time" cap for now and save my Remington #10s for Cowboy matches. All my current guns have Slix Shots, so I would be interested to see how the RWS caps would work with them.

[Hawg]

RWS 1075 is sold as a #11 cap. 1075 is just their part number. 1055 is their #10 cap.

[Steamburn]

I've only found RWS 1075 caps once many years ago, before the Slix Shot nipples became available. They worked fine on factory nipples then. I would like to have "practice time" cap for now and save my Remington #10s for Cowboy matches. All my current guns have Slix Shots, so I would be interested to see how the RWS caps would work with them.

Good afternoon everybody.
I'm running out of caps and I didn't find the answer if RWS 1075s fit and work well with the Slix Shot nipples.  Do they?
Thanks,
Steamburn

[Captainkirk]

Can't say for sure, but I've used them in the past and seem to recall they fit both #10 and #11 nipples. IIRC the SlixShots are #11-ish sized?

[45 Dragoon]

Yes, they work.
Rem. 10's  = CCI 11's = RWS 1075'S

[Hawg]

Yes, they work.
Rem. 10's  = CCI 11's = RWS 1075'S

I use factory nipples. RWS 1075 are too big. Remington #10's fit good. CCI #10's are tight but they're all I use. CCI #11's are too big.

[mike116]

I have several revolvers I bought new, both Pietta and Uberti.    There is no consistency in the size of caps that work with each revolver.   I always have four sizes of caps with me.   That's the argument for Slixshot nipples.  Change all your nipples to Slixshot which are sized for #11 caps.    Look at the link below for a list of the caps that Slixshot says fit their nipples.

https://www.slixprings.com/proddetail.php?prod=SliXshot-Black-Powder-Nipples

I can't afford $40 per revolver so I'll keep carrying several sizes of caps

[Steamburn]

Thank ya'll for your input.
Ordered 3 tins (250 caps ea)of RWS 1075 from Powder Valley.
That should last me for a while.
I'll report back when I get to use them.