Hi, I have had a new Pietta Paterson extra cylinder in the Pietta box sitting right next to my drone controllers for a few months. The weather is too bad to fly today so I decided to put that cylinder into working order. The cylinder was degreased using paint thinner, dried, and then air blown into the chambers to remove any remaining solvent in the nipples. The nipples were then removed, the threads coated with antisize, and then reinserted in the chambers. Eighteen grains of Black Mz were put into each chamber followed by a lubed wad. Each chamber was then compressed with an arbor press. Ballistic Products 0.380 balls were then seated in the chambers using the arbor press. The cylinder was then lightly coated with Ballistol and returned to my Paterson extra cylinder storage. There are now six loaded (no caps) Paterson cylinders ready to use.
Regards,
Richard